Main Article Content
Abstract
The aim of the study was to determine the impact of atmospheric emissions from the Abagur Sinter Factory on the health of Novokuznetsk residents on the basis of a risk assessment.
Materials and methods. The study was conducted using data from the volume of maximum permissible emissions of the Abagur Sinter Factory. To assess the risks, 40 exposure points were selected in different districts of the city. Calculations of maximum and average concentrations of pollutants in the atmospheric air generated by the sinter factory’s stationary sources at various points were performed using the ECOcenter-Standard software package. Maximum permissible concentrations were determined in accordance with Sanitary Rules and Norms 1.2.3.3685-21. Non-carcinogenic and individual carcinogenic risks were calculated according to Guideline 2.1.10.3968-23.
Results. The calculated maximum and average pollutant concentrations at the selected points did not exceed the corresponding maximum permissible values. Hazard quotients for acute and chronic inhalation exposure to pollutants at various points corresponded to minimal or permissible (acceptable) risk levels. Hazard indices on critical organs and systems for acute and chronic inhalation exposure to pollutants were also at minimal or permissible (acceptable) levels. The total individual carcinogenic risk (1.11×10-6 to 8.11×10-5) corresponded to the permissible (acceptable) level.
Conclusion. Atmospheric emissions from the Abagur Sinter Factory do not have a significant impact on the health of Novokuznetsk residents.
Keywords
Article Details
Information about financing and conflict of interests
The authors declare that they have no apparent or potential conflicts of interest related to the publication of this article.
This work is licensed under a Creative Commons Attribution 4.0 License.
How to Cite
References
1. Korshikov GV. O teorii i praktike aglomeracionnogo proizvodstva. Steel. 2018; (1): 12-19. Russian (Коршиков Г.В. О теории и практике агломерационного производства //Сталь. 2018. № 1. С. 12-19.)
2. Odintsov AA. The current state of iron ore agglomerate production technology in domestic metallurgy. Bulletin of the Siberian State Industrial University. 2022; (3): 28-36. Russian (Одинцов А.А. Современное состояние технологии производства железорудного агломерата в отечественной металлургии //Вестник Сибирского государственного индустриального университета. 2022. № 3. С. 28-36.)
3. Dyachok NG, Shentsov AI. Main stages of improving technology and equipment at the sintering plant of PC EVRAZ ZSMK. Ferrous metallurgy. Bulletin of scientific, technical and economic information. 2019; 75(6): 683-689. Russian (Дячок Н.Г., Шенцов А.И. Основные этапы совершенствования технологии и оборудования на агломерационной фабрике ОАО ЕВРАЗ ЗСМК //Черная металлургия. Бюллетень научно-технической и экономической информации. 2019. Т. 75, № 6. С. 683-689.)
4. Surzhikov DV, Kislitsyna VV, Shtaiger VA, Golikov RA. Experience in using statistical and mathematical technologies to assess the impact of atmospheric pollution on public health in a large industrial center. Hygiene and Sanitation, Russian journal. 2021; 100(7): 663-667. Russian (Суржиков Д.В., Кислицына В.В., Штайгер В.А., Голиков Р.А. Опыт применения статистико-математических технологий для оценки влияния атмосферных загрязнений на здоровье населения в крупном промышленном центре //Гигиена и санитария. 2021. Т. 100, № 7. С. 663-667.) doi: 10.47470/0016-9900-2021-100-7-663-667
5. Skovronskaya SV, Meshkov NA, Valtseva EA, Ivanova SV. Priority risk factors for population health in large industrial cities. Hygiene and Sanitation, Russian journal. 2022; 101(4): 459-467. Russian (Сковронская С.А., Мешков Н.А., Вальцева Е.А., Иванова С.В. Приоритетные факторы риска для здоровья населения крупных промышленных городов //Гигиена и санитария. 2022. Т. 101, № 4. С. 459-467.) doi: 10.47470/0016-9900-2022-101-4-459-467
6. Myakisheva YuV, Fedoseikina IV, Mikhayluk NA, Skazkina OYa, Aleshina YuA, Pavlov AF. Ambient air pollution and population health risks in a contaminated area of a large industrial center. Public health and life environment – PH&LE. 2022; 30(3): 44-52. Russian (Мякишева Ю.В., Федосейкина И.В., Михайлюк Н.А., Сказкина О.Я., Алешина Ю.А., Павлов А.Ф. Влияние загрязнения атмосферного воздуха на формирование риска здоровью населения экологически неблагополучного района крупного промышленного центра //Здоровье населения и среда обитания – ЗНиСО. 2022. Т. 30, № 3. С. 44-52.) doi: 10.35627/2219-5238/2022-30-3-44-52
7. Frolov YuA, Kaplun LI, Mishchenko IF, Aslamova YaYu. Status and development prospects of sinter production technology. Part 11. Technological methods of environmental protection from harmful emissions from sintering plants. Ferrous metallurgy. Bulletin of scientific, technical and economic information. 2018; (2): 16-31. Russian (Фролов Ю.А., Каплун Л.И., Мищенко И.Ф., Асламова Я.Ю. Состояние и перспективы развития технологии производства агломерата. Часть 11. Технологические методы защиты окружающей среды от вредных выбросов агломерационных фабрик //Черная металлургия. Бюллетень научно-технической и экономической информации. 2018. № 2. С. 16-31.)
8. Dvurechensky VG, Filonova EN. The reduction to the anthropogenic environmental stress in the South Kuzbass agglomeration caused by waste. Life safety. 2016; (8): 50-55. Russian (Двуреченский В.Г., Филонова Е.Н. Пути снижения антропогенной нагрузки на окружающую среду Южного Кузбасса, связанной с отходами агломерации //Безопасность жизнедеятельности. 2016. № 8. С. 50-55.)
9. SanPiN 1.2.3685-21 «Hygienic standards and requirements for ensuring the safety and (or) harmlessness of environmental factors for humans». M.; 2021. 465 p. Russian (СанПиН 1.2.3685-21 «Гигиенические нормативы и требования к обеспечению безопасности и (или) безвредности для человека факторов среды обитания». М., 2021. 465 с.)
10. Guidelines for assessing the risk to public health when exposed to chemicals polluting the environment “R 2.1.10.3968-23”. Moscow: Federal Service for Surveillance in Healthcare; 2023. 203 p. Russian (Руководство по оценке риска здоровью населения при воздействии химических веществ, загрязняющих среду обитания: Р 2.1.10.3968-23. М.: Федеральная служба по надзору в сфере здравоохранения, 2023. 203 с.)